Introduction
The tipping switch tester is mainly used to test the on-off life of the tipping switch at different angles. This equipment is mainly designed for the electric fan industry. The equipment adopts the PLC processor + touch screen control mode, with optional external load, the stepping motor angle can be driven arbitrarily, and can stay and twist at any section and angle. The fixture has high universality, and each station can be tested at the same time The test shall not interfere with each other and enter the operation interface. The test time, dwell time, test cycle, rotation angle, test times, etc. can be preset and displayed in real time. When the product is damaged or the test is completed, the machine will give an alarm automatically. The current test times can be saved even in case of sudden power failure, and the remaining tests can be carried out after power on.
Technical Characteristics
Test station: 2-6 station (optional)
Test sample: various dump switches
Control mode: PLC processor + touch panel + special measurement and control program
Driving mode: stepper motor + driver + encoder
Rotation mode: one-way rotation or two-way rotation and can be adjusted by sections and angles
Rotation angle: - 180 - + 180 °
Angle segment: 0-99999 segment
Test time: 0-999999 seconds / time
Test voltage: 0-300V adjustable
Detection mode: current on / off
Load: 0-30A
Detection parameters: voltage, current, power, on-off times, angle judgment
Power supply: 0-380VAC 50Hz/60Hz 3.5Kw
Equipment size: 1500×650×1650mm
http://www.gzallison.com/